Frequently Asked Questions - Miele G 641 SCi Operating Instructions Manual

Frequently asked questions

With the aid of the following guide, minor problems can be fixed without a service
call.
,
Repairs should only be carried out by a qualified and trained person in ac-
cordance with local and national safety regulations. Unauthorized repairs could
cause personal injury or machine damage.
What if ...
the dishwasher does not
start?
the dishwasher does not
start, after pressing the
"Start" button and
the "Start" indicator
flashes?
the dishwasher stops
during a program?
the "Intake/Drain" indi-
cator is lit or flashing
and the dishwasher may
have stopped?
34
Possible fault
The door is not properly
closed.
The machine is not
plugged in.
The fuse is defective or
the breaker has tripped.
The program selector is
set to "Stop".
The fuse or breaker has
tripped.
The water valve is closed. Open the water valve.
The filter in the water inlet
is blocked.
The flow pressure at the
water inlet is less than
4.5 psi (0.3 bar).
The waterproof system
has activated.
Fix
Close the door firmly.
Insert the plug.
Reset the circuit breaker.
Make sure it is a 15 A
breaker.
– Turn the program selec-
tor to the desired pro-
gram.
– Press the "Start" button.
Reset the circuit breaker.
Make sure it is a 15 A
breaker.
See maintenance instruc-
tions.
Contact a plumber.
Call the Miele Technical
Service Department.