Box Contents; Tools Required - Sirius Satellite Radio Outdoor Satellite Radio Antenna Installation Manual

Outdoor
Table of Contents

Advertisement

Thank you for purchasing a SIRIUS Outdoor Satellite Radio Antenna.
Your new SIRIUS Outdoor Satellite RadioAntenna is a high-performance
antenna, specifically designed to receive signals from the SIRIUS satellites and
terrestrial (ground) transmitters when mounted outdoors on a home or other
building. This antenna has been approved by Sirius Satellite Radio to receive the
SIRIUS signal under a variety of conditions within the SIRIUS North American
coverage area.
Installation of this antenna requires experience in mechanical and electrical
procedures. Review this installation manual before beginning the installation of the
antenna. If you are not comfortable or experienced with general installation
procedures, SIRIUS recommends that you have a professional install the antenna
for you.
The antenna should be mounted according to the instructions in this manual to
ensure the best quality reception of the SIRIUS signal. All necessary mounting
hardware for a variety of mounting options is included with the antenna.
Box Contents
Open the box and verify that all the items shown below are included with the
Outdoor Antenna. If any items are missing, please contact your dealer or retailer
immediately. Keep your purchase receipt and the packaging materials should you
need to return or ship the antenna.
Outdoor Antenna
30
ft.
Antenna Cable
U-Bolts (2)
Mounting Brackets (2)
Hex Lock Nuts (4)
#10 Screws (4)
Installation Manual (not shown)
Tools Required
A Phillips screwdriver is needed for installation. Depending upon the type of
installation, a 3/8 in. wrench and power drill with a 3/32 in. drill bit may also be
required.

Advertisement

Table of Contents
loading

Table of Contents