Table of Contents
Advertisement
3.
Fit the sheetrock in place with
sheetrock screws spaced 4 inches
apart.
4.
Carefully cut away the sheetrock to
reveal the cabinet's aperture. Now
that you can see the location better,
add screws to secure the sheetrock
to the front face of the subwoofer
cabinet. Make sure that no screws
pass close to the speaker wires or
the terminal cup.
5.
With the cardboard debris shield in
place, the walls can be painted and
finished as required.
Sheetrock over the
subwoofer installation
14
6.
Leave the cardboard debris shield
in place until you are ready to
install the woofer baffle assembly.
It can be removed by cutting it and
carefully pulling out the rivets hold-
ing it in place.
7.
See page 17 for details regarding
the installation of the woofer baffle
assembly and grille frame assem-
bly.
User's Manual
Advertisement
Table of Contents
