The Connector Can't Reach The Port; I've Made A Mistake Editing; No Video Source Error - Gadget Geek DIVA112 Quick Install Manual

installation, refer to the instruction manual of the USB
device or contact the manufacturer for further information.)
THE CONNECTOR CANT REACH THE PORT
In some cases, the connector of the USB device won't reach
into the USB port for various reasons. One of these may be
because you have something that may be large in the port
next to it.
Solution:
Plug in the USB extension cable that is supplied with this
product. This will allow the device to be sitting further away
from the port without anything interfering with its
connection.
OOPS, I MADE A MISTAKE EDITING
No big deal. You aren't doomed if you've made an error and
already burned your DVD. With compatible media, you can
go back to edit your DVD discs without worry. You can use
rewritable media DVD‐RW or DVD+RW media to create a
test recording. If there is an error you can erase the disc and
record again.
NO VIDEO SOURCE ERROR
Under the "CAPTURE" section click "Advance", click on the
20