Table of Contents
Advertisement
34
EN
EJECT Switch
Power lamp
Battery pack remaining power indicator
Tape counter
Recording mode indicator
S ET
SP
M 1 : 23 : 45
TAPE END
VOLUNE
Viewfinder indications
Rewind (2) Button
Fast-Forward
(3) Button
Play/Pause (4/6)
Button
Stop (5) Button
Power Switch
Tape running indicator
4
4 : Playback
AT
3 : Fast-Forward/
Forward Search
2 : Rewind/Reverse
Search
6 : Still Playback
PLAYBACK
1
LOAD A CASSETTE
Slide EJECT to open the cassette holder, then insert
the cassette with the label facing out. Press the Close
button to ensure the holder is closed and locked.
2
SELECT MODE
Set the Power Switch to "PLAY". The power lamp
lights.
3
PLAY BACK
Press 4/6. The playback picture appears.
4
STOP PLAYBACK
Press 5.
Rewind or Fast-Forward the tape
Press 2 to rewind, or 3 to fast-forward the tape during
Stop mode.
NOTES:
The camcorder shuts off automatically after about 5
minutes in Stop mode. To turn on again, set the Power
Switch to "OFF", then to "PLAY".
If a blank portion on the tape is played back, the screen
may become black. This is not a malfunction.
Basic Playback
Advertisement
Table of Contents
