Parameter List - Casio Celviano AP-460 User Manual

Configuring Settings with the Keyboard

Parameter List

■ Tones
Parameter Settings
Hall simulator
Off (OFF), DUTCH
bp
CHURCH to
FRENCH
CATHEDRAL
Default:
STANDARD
HALL
Tone selection See page EN-7.
bq
Default: GRAND
PIANO
(CONCERT)
Chorus
Off (OFF), 1 to 4
br
Default: Off
(CHORUS)
Brilliance
–3 to 0 to 3
bt
Default: 0
(BRILLIANCE)
Layer balance
–24 to 0 to 24
cn
Default: –10
Duet pan Off (OFF), On (ON)
cr
Default: Off
Bass damper Off (OFF), On (ON)
cs
effect Default: Off
Damper noise
Off (OFF), On (ON)
ct
Default: On
EN-30
Operation
Type
Description
(page
EN-28)
A Specifies the hall simulator of
notes. (page EN-10)
A Assigns a tone to the keyboard.
(page EN-7)
D Controls the breadth of notes.
(page EN-10)
B Specifies the brilliance of notes.
Pressing [+] makes notes brighter
and harder. Pressing [–] makes
notes mellower and softer.
B Specifies the volume balance
between the main tone and the
layered tone. (page EN-9)
D When turned on, outputs the left
side keyboard tone from the left
speaker and the right side
keyboard tone from the right
speaker while duet is turned on.
(page EN-13)
D When turned on and the BASS
(LOWER) tone is selected, pressing
the damper pedal or sostenuto
pedal will apply sustained
reverberation to the BASS
(LOWER) tone. (page EN-8)
D Enables/disables damper noise
output. (page EN-12)
Remarks
• To return the setting to its initial default
(0), press [+] and [–] at the same time.
• To return the setting to its initial default
( ), press [+] and [–] at the same time.
–10
• Supported only when a piano tone is being
used. Hall simulator is not applied when
this parameter is turned on.