Installation - Perimeter View 01-CM-709M1 Instruction Manual

8

Installation

1
Inserting Type >>
Appoint attaching place and put together the monitor and bracket as follows
installation drawing. Insert combined monitor after arranging connecting cable
inside.
TAPPING SCREW T1 M4 X 10 (4ea)
MACHINE SCREW M3 X 5 (6ea)
2
Exposure Type >> (Bracket Cover : OPTION)
※ When you use the monitor exposurely , bracket cover make clean side of
monitor.
16
3
Monitor installation with stand & sun visor >> (OPTION)
TAPPING SCREW T1 M4.0 X 12 (3ea)
INSERT BOLT (2ea)
FLAT WASHER M3 (4ea)
(1) Remove a protecting tape and attach stand place.
(2) Fix a stand with taping screw.
(3)&(4) Connect stand and monitor and fi x a height of monitor with fi x knob.
(5) Then attach a sunvisor to monitor side and fi x it with a screw.
FOAM TAPE
⑥
NOTICE
VELCRO TAPE
PORON TAPE
⑤
⑥
17