Cuddy Cabin Models - Bayliner Trophy 1703FS Owner's Manual Supplement

26 CHAPTER 3: COMPONENTS/SYSTEMS

Cuddy Cabin Models

J
SECURING PIN
DECK HINGE
END EYE
1. Slide the end eyes of the main bow (A) into the mid deck hinges (B) and secure
with the pins.
2. Attach the forward braces (C) to the secondary bow (D).
3. Slide the end eyes of the forward braces into the forward deck hinges (E) and
secure with the pins.
4. Attach the aft braces (F) to the main bow (A).
5. Slide the end eyes of the aft braces into the aft deck hinges (G) and secure with
the pins.
6. Make the canvas taut by pulling aft and down on the aft edge (H) of the bimini
top while securing the aft brace jaw slide (I). Also pull forward and down on
the forward edge (J) of the bimini top while securing the forward brace jaw
slide (K).
7. Tighten the top straps (L), if needed, by adjusting the buckle slides.
8. Additional canvas (i.e. side curtains, slant back cover or camper cover) should
be secured to the top canvas before final adjustment. Like the top, the addi-
tional canvas should be smooth and taut.
Trophy Owner's Manual Supplement
H
L
D
E
C
I
K
A
F
B
G
JAW SLIDE
NOTE:
SOME HINGES MAY BE
LOCATED ON DECK