JVC GR-DVX8 Instructions Manual page 60

60
EN
SYMPTOM
13. Programme AE with
special effects and Fade/
Wipe Effects do not work.
14. The Black & White Fader
does not work.
15. The Dissolve function does
not work.
16. The Picture Wipe and
Dissolve functions do not
work.
17. The picture wipe function
does not work.
TROUBLESHOOTING
POSSIBLE CAUSES
13. •The Operation Switch is set
to " ".
14. •The Sepia or Monotone
mode is activated.
15. •The Sepia, Monotone or
Slow Shutter mode of
Programme AE with special
effects is activated.
•"WIDE MODE" is set to
"SQUEEZE" or "PS-WIDE"
in the Menu Screen.
•The previously selected
mode of Programme AE
with special effects was
changed after the last
selected scene for editing
was registered.
16. •The last selected editing
scene is ending.
•At the end of the last
selected scene for editing,
the POWER Switch was set
to "OFF".
•The power is off.
17. •The Slow Shutter mode is
activated.
•"WIDE MODE" is not set to
"OFF".
CORRECTIVE ACTION
13. •Set the Operation Switch to
" " ( pg. 28, 30).
14. •Turn off Sepia and Mono-
tone ( pg. 28, 30).
15. •Turn off Sepia, Monotone or
Slow Shutter before adding
Dissolve to a scene
transition ( pg. 28, 30).
•Set "WIDE MODE" to
"CINEMA" or "OFF" mode
( pg. 24).
•Make sure you have
selected the mode of
Programme AE with special
effects you want before
starting editing
( pg. 28, 30).
16. •Select Picture Wipe or
Dissolve before beginning
recording. The effects are
then automatically activated
( pg. 28).
•Do not turn off the
camcorder's power after
setting Edit-In and Edit-Out
points, as they will all be
erased ( pg. 28).
•The camcorder automati-
cally shuts off after 5 minutes
have elapsed in the Record-
Standby mode. Make sure
you continue operations
within 5 minutes after
engaging Record-Standby
mode ( pg. 28).
17. •Disengage the Slow Shutter
mode or set "WIDE MODE"
to "OFF" before preparing
to use the Picture Wipe
( pg. 24, 28, 30).
(cont.)