Ramps On Changes; Software Version; Preset Utilities; Recall A Preset - Mackie SP260 Owner's Manual

Ramps on changes

When engaged, sudden volume changes may be
avoided when changing parameter values, particularly
Disengage this feature for live applications since instant
response to change is desired.
Turn the Edit2 [8] or Edit3 [9] Wheel to scroll
between Ramps : On and Ramps : Off [default]. If
changing, press the Enter Button [10] only once here.
The processor will return to the Ramps on changes
splash screen. Or p

Software Version

Nothing may be changed here. Just press the Enter
Button [10] to view what version of software is installed
SP260 training. Next we will take a look at the Preset

Preset Utilities

This is where to save, recall and delete presets
on the SP260. This is useful when the PA system
has multiple setups for different environments or
several loudspeaker systems utilizing varying setups.
Note: As mentioned earlier, the SP260 will load up the last
state it was in when it was powered down.
As discussed earlier, the way to get here from the
trick. Now press the Enter Button [10] again to reach
Again, we will go through each of these sub-menus,
one-by-one (and in order), but know that...
(1) The Nav/Edit1 Wheel [7] is used to navigate
(3) The Enter Button [10] is used to enter and edit
Without further ado, press the Enter Button [10] to
enter Recall a Preset.

Recall a Preset

If a preset has been saved earlier, it may be recalled
here. If no presets are stored in the unit, the processor
will return to the Recall a Preset splash screen.
If presets are available, turn the Edit2 [8] or
Edit3 [9] Wheel to select which preset to recall. Press
the Enter Button [10] to select a preset and again to
confirm recall. The preset will load and the processor
will return to the Recall a Preset splash screen.

Save a Preset

Once the perfect system settings have been
dialed in, save it to the SP260 for recall later. Turn
the Edit2 [8] or Edit3 [9] Wheel to scroll between
decide where to save the preset.
Now you get to name the preset. The Nav/Edit1
Wheel [7] moves the cursor left and right while the
Edit2 [8] and Edit3 [9] Wheels change the text.
Once satisfied with the results, press the Enter
confirm. The processor will return to the Save a
Preset splash screen.
It is possible to save over an existing preset.
If attempted, you will need to confirm by pressing
the Enter Button [10]
without overwriting the preset.

Delete a Preset

they? If a preset is no longer needed for recall, it may be
deleted here. It will help avoid confusion down the road
and keep the SP260's memory clutter-free.
Turn the Edit2 [8] or Edit3 [9] Wheel to scroll
once you decide on which preset to delete.
again to confirm. The processor will return to the
Delete a Preset splash screen.
SP260 training. Next we will take a look at the Security
Owner's Manual
15