Environmental Information; Ec Declaration Of Conformity - Flymo Original Instructions Manual

Husqvarna UK Ltd. are manufactured under an Environmental Management System (ISO 14001) using, where prac-
tical, components manufactured in the most environmentally responsible manner, according to company procedures,
and with the potential for recycling at the end of the products' life.
• Packaging is recyclable and plastic components have been labelled (where practical) for categorised recycling.
• Awareness of the environment must be considered when disposing of 'end-of-life' product.
• If necessary, contact your local authority for disposal information.
The symbol on the product or on its packaging indicates that this product may not be treated as household waste. In-
stead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.
By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the envi-
ronment and human health, which could otherwise be caused by inappropriate waste handling of this product.
For more detailed information about recycling of this product, please contact your local council office, your household
waste disposal service or the shop where you purchased the product.
Husqvarna AB, 561 82, Huskvarna, Sweden
Declare under our sole responsibility that the product(s);
Category........................................ Electric Rotary Lawnmower
Model(s)......................................... TC330
Identification of Series................... See Product Rating Label
Year of Construction...................... See Product Rating Label
Complies with the essential requirements & provisions of the following EC Directives:
98/37/EC (until 28.12.09), 2006/42/EC (from 29.12.09), 2004/108/EC, 2000/14/EC
based on the following EU harmonized standards applied:
EN60335-1, EN60335-2-77, EN836, EN55014-1, EN61000-3-2, EN61000-3-3, EN50366
The maximum A weighted sound pressure level L
product(s) corresponds to the Level given in the table.
The maximum hand / arm vibration weighted value measured according to EN ISO 5349 on a sample of the above
product(s) corresponds to the Value a h given in the table.
2000/14/EC: The Measured Sound Power L
Conformity Assessment Procedure.................. Annex VI
Notified Body.................................................... Intertek, Cleeve Road
Newton Aycliffe, 25/11/2009
M. Bowden,
Research & Development Director
Husqvarna UK Ltd.
Keeper of technical documentation
Our policy of continuous improvement means that the specification of products may be altered from time to time without prior notice.
Copyright © 2008 Flymo S.A. All rights reserved. Flymo® and other product and feature names are registered or unregistered trademarks
5119701-04

Environmental Information

EC Declaration of Conformity

at the operator's position, recorded on a sample of the above
pA
& Guaranteed Sound Power L
WA
Leatherhead, Surrey
KT22 7SB, England
Type
Width of Cut (cm)
Speed of Rotation of Cutting Device (RPM)
Power (kW)
Measured Sound Power LWA (dB(A))
Guaranteed Sound Power LWA (dB(A))
Level (dB(A))
Value a h (m/s 2 )
Uncertainty K of (m/s 2
a h
Weight (Kg)
of Flymo S.A.
Husqvarna AB
561 82
Huskvarna
Sweden
values are according to the tabulated figures.
WA
TC330
33
4,300
1.5
92
93
78.8
1.64
)
1.5
10.5