Scan Mode - Mercedes-Benz Sound 5 Operator's Manual

Using the steering wheel buttons
+
You can switch between station selection
via memory presets and station selection
via frequency on the instrument cluster.
For information on how to do this, see the
vehicle Operator's Manual.
Set the desired waveband ( page 20).
Switch the display to the Audio menu
( page 17).
Press the & button.
The station search starts in ascending or-
der.
or
Press the * button.
The station search starts in descending
order.
Depending on the instrument cluster set-
ting, the station search stops at the next
station which can be received, either pre-
set in the memory or on the waveband.
Tuning in manually
+
This function is not available for Weather
Band (WB).
Set the desired waveband ( page 20).
Briefly press the n or ý button on
the radio.
The waveband is searched in the frequen-
cy steps stated above.
Press and hold the n or ý button
on the radio.
The search does not stop at the frequen-
cy steps stated above.
Selecting using the station presets
You can store 5 stations in the AM waveband
and 5 stations in the Weather Band (WB).
For the FM wavebands, a total of 10 fixed sta-
tions and 5 Autostore memory presets can
be used.
Using Sound 5
Set the desired waveband ( page 20).
Press one of the buttons from 4 to
D.
The radio selects the stored station.
+
With the FM 6–10 range, memory presets
6–10 are also set using buttons 4 to
D. Memory preset location 10 appears
in the display as FM0
Using the steering wheel buttons
Set the desired waveband ( page 20).
Switch the display to the Audio menu
( page 17).
Press the & or * button.
The stored station is selected.
You can select presets 1–10 using the steer-
ing wheel buttons if:
the Sound 5 radio is either in the FM 1–5
or FM 6–10 preset group and
the display is set to "Select station from
memory" ( page 17). Information on
how to set the display can be found in the
vehicle Operator's Manual.

Scan mode

Scan mode plays each station with ade-
quate reception for around 8 seconds.
After it has run through the stations
twice, the scan stops automatically at the
station you were listening to before the
scan was started.
Starting scan mode
Switch to the desired waveband
( page 20).
Press the SC button.
The station search starts.
Radio mode
.
21