Adsl Modem Configuration - Medialink MWN-WAPR150N User Manual

*If you cannot or choose not to use the CD for
configuring your router, proceed to "Chapter 3.2
Login to the Router" of this User Guide to complete
the configuration of your router.
2.1a DSL Modem Configuration
Some DSL Modems require the PPPoE connection to be
handled by the router instead of the modem to be able to
successfully create a network using some routers. To
configure your DSL modem, first connect your computer
directly to the modem using a network cable and proceed
with the following steps:
1. Open your internet browser and in the address bar
type the IP address of the modem. (Typically the
default IP address is 192.168.0.1 or 192.168.1.1.
See your modem's manual to be sure.)
2. Click on Advanced Settings
3. The PPP Location must be set to "Bridged" mode
4. You may have to click "WAN IP Address" to see the
PPP Location
MWN-WAPR150N Wireless Router
11