Panasonic BL-C1 Troubleshooting Manual page 9

Problem
Authentication
windows are
consequently
displayed.
Only half of the
image is
displayed.
The camera
image is not
displayed, or not
displayed
properly.
Camera images
are not
displayed on the
Multi page.
The error
message
"ERROR CODE
(4/12002)" is
displayed, and
the image is not
displayed.
• The user name and password for the administrator have been
changed. Or the user name and password for the general users
have been changed.
Close the web browser, and access the camera again.
• You are using Internet Explorer 4.xx or lower.
Upgrade Internet Explorer to version 6.0 or greater.
• ActiveX Controls are not installed in Internet Explorer.
®
ActiveX Controls should be installed to display video (Motion
JPEG). For the ActiveX Controls installation method, see
page 20 of the Operating Instructions on the CD-ROM when
using Microsoft
19 of the Operating Instructions on the CD-ROM when using
other operating systems.
• The network is congested.
Pages may not be displayed immediately. Wait for a moment.
• The web browser is accessing a proxy server.
Set the web browser to access the Internet directly (see page
127 of the Operating Instructions on the CD-ROM).
• The images may not be displayed if private IP addresses and
global IP addresses (or domain names) are mixed on the Multi-
Camera page.
To view the images within the LAN, set the Multi-Camera
page using private IP addresses. To view the images from
the WAN side, set the Multi-Camera page using global IP
addresses (or domain names) (see page 93 of the Operating
Instructions on the CD-ROM).
• A wrong IP address or domain name may be set on the Multi-
Camera page.
Set the correct IP address or domain name.
• If the correct IP address or domain name was already set, the
network connection may be timed out.
Access the network when it is less busy, or close other
software that is connected to the network.
Cause and Remedy
Windows XP Service Pack 2, or see page
® ®
Troubleshooting
9