TROUBLESHOOTING INTRODUCTION Thank you for purchasing the Luvion Supreme Connect Wifi Bridge. Now you can see and hear your baby or even more babies through your tablet or smartphone. Please retain your original dated sales receipt for your administra- tion. For service and warranty issues you will always be asked for a copy of the receipt. For warranty issues you can contact your Luvion dealer or your local Luvion distributor.
LUVION Premium Baby products SAFETY INSTRUCTIONS Keep small parts away from children. This product is not a toy. Do not allow children to play with it. This product is not intended as a substitute for adult supervision. Only use the original supplied power chargers.
5.1 and above Android 2.2 and above NOTE: Luvion recommends a minimum upload speed of 512Kbps An upload speed of 1Mbps or higher is recommended for best performance. NOTE : Up to 3 users can be connected to the bridge at the same time.
The icon appears on the handheld monitor when someone is connected using the Luvion app. If Recording is in progress when someone connects remotely, the recording will be stopped and it does not resume when they disconnect.
The monitor will charge when connected to the bridge. It takes 5 hours to fully charge a battery. On your smartphone or tablet, download our Luvion App for free from the App Store (iPhone®/iPad®) or the Google Play Store (Android™).
Page 7
LUVION Premium Baby products Enter a name for your Supreme Connect. Enter the default password ‘000000’ (six times zero). Tap ‘Save’. Your Supreme Connect Bridge should now show up in the ‘Device List’ with an ‘Online’ indication. The app will connect to your monitor and stream live video from your cameras.
USING LIVE VIEW (IPHONE/IPAD) You can view your camera in either portrait or landscape mode. NOTE: The controls above are only shown in portrait mode. ZOOMING IN LIVE VIEW With Live View you may control the camera, allowing you to look around and zoom in/ out.
LUVION Premium Baby products VIEWING AND SHARING SNAPSHOTS You can take snapshots of live video from your cameras by pressing You can view or share snapshots using the app. To view your snapshot, tap the landscape icon. You are now viewing the photo gallery. To open and share a snapshot, tap on it.
The default password is 000000 (Six times zero). It is recommended to create your own password to ensure that no one may access your video. To change the password: Open the Device List screen in Luvion. Press ‘Back’ if you are currently connected to a camera. Tap the ‘...
Page 11
The video quality can be increased for fast Internet connections or decreased to improve the video performance. If the video is choppy or slow, it is recommended to reduce the video quality setting. Open the Device List screen in the Luvion app. Press ‘Back’ if you are currently connected to a camera.
ANDROID ETHERNET SETUP Start the Luvion App Tap ‘Click here to add device’ Enter the UID code for the bridge in one of the following ways: A. Tap Scan and scan the QR code on the side of the bridge using your device’s camera. You may be prompted to select the app that will be used to scan the QR code.
Page 13
LUVION Premium Baby products The bridge will show up in your Device List with an ‘Online’ status, select your device to connect. The app will now connect to your system and stream live video from your cameras.
USING LIVE VIEW ANDROID You can view your camera in either portrait or landscape mode. ZOOMING IN LIVE VIEW With Live View you may control the camera, allowing you to look around and zoom in/ out. This is done with the standard ‘gestures’ of your phone Please look below for a short explanation.
Icon. You can view or share snapshots . Snapshots are saved in .jpg format. They are saved to the /DCIM/Luvion folder on your device’s memory. To view snapshots: In order to view snapshots, use the...
CHANGING THE BRIDGE PASSWORD The default password is 000000 (six times zero). It is recommended to create your own password to ensure that no one may access your video. To change the password: Open the Device List screen. Go back if you are currently connected to a camera.
Page 17
If the video is choppy or slow, it is recommended to reduce the video quality setting. Changing the video qualiity: Open the Device List screen in Luvion. Press back if you are currently connected to a camera. Tap ‘...
Need help?
Do you have a question about the Supreme Connect and is the answer not in the manual?
Questions and answers