Playback Menus - JVC GR-D350AG Getting Started

Playback Menus

[ ] = Factory-preset
SOUND MODE and NARRATION
During tape playback, the camcorder detects the
sound mode in which the recording was made,
and plays the sound back. Select the type of
sound to accompany your playback picture.
According to the menu access explanation on
page 22, select "SOUND MODE" or
"NARRATION" from the Menu Screen and set it
to the desired parameter.
The settings below are effective only for video
playback except "REC MODE" and "BRIGHT".
The parameters (except "OFF" in
SOUND MODE and NARRATION settings) are the
same as in the description on page 23,
REC MODE
Allows you to set the video recording mode (SP
or LP) depending on your preference.
* SP indicator does not appear on the screen.
SOUND MODE
[STEREO ]: Sound is output on both "L" and
"R" channels in stereo.
SOUND L : Sound from the "L" channel is
output.
SOUND R : Sound from the "R" channel is
output.
NARRATION
Although it is not possible to perform audio
dubbing with this camcorder, you can hear
sound from an audio-dubbed tape during
playback using this function.
[OFF]: Original sound is output on both "L" and
"R" channels in stereo.
ON: Dubbed sound is output on both "L" and "R"
channels in stereo.
MIX: Original and dubbed sounds are combined
and output in stereo on both "L" and "R"
channels.
BRIGHT
☞ pg. 15, "Brightness Adjustment Of The
Display"
ON SCREEN
24
.
[SP*] / LP
MENUS FOR DETAILED ADJUSTMENT
DATE/TIME
[OFF]: The date/time does not appear.
ON: The date/time is always displayed.
ON SCREEN
When set to "OFF", the camcorder's display
disappears.
TIME CODE
☞ pg. 18, "Time Code"
,
EN
[OFF] / ON
OFF / [LCD] / LCD/TV
[OFF] / ON
25