Playback Menus - JVC GR-D32 Instructions Manual

MENUS FOR DETAILED ADJUSTMENT
18
EN

Playback Menus

[ ] = Factory-preset
SOUND MODE and NARRATION
During tape playback, the camcorder detects the sound
mode in which the recording was made, and plays the
sound back. Select the type of sound to accompany your
playback picture. According to the menu access
explanation on page 15, select "SOUND MODE" or
"NARRATION" from the Menu Screen and set it to the
desired parameter.
SOUND MODE
[STEREO ]: Sound is output on both "L" and "R"
channels in stereo.
SOUND L : Sound from the "L" channel is output.
SOUND R : Sound from the "R" channel is output.
NARRATION
[OFF]: Original sound is output on both "L" and "R"
channels in stereo.
ON: Dubbed sound is output on both "L" and "R"
channels in stereo.
MIX: Original and dubbed sounds are combined and
output in stereo on both "L" and "R" channels.
NOTES:
The "SOUND MODE" setting is available for both 12-bit and
16-bit sound. (In previous models' functions, "12-bit" is
called "32 kHz" and "16-bit" is called "48 kHz".)
The camcorder cannot detect the sound mode in which the
recording was made during fast-forward or rewind. During
playback the sound mode is displayed in the upper left
corner.
REC MODE [SP] / LP
Allows you to set the video recording mode (SP or LP)
depending on your preference. It is recommended you
use "REC MODE" in VIDEO Menu when using this
camcorder as a recorder during dubbing. (
NOTE:
"REC MODE" can be set when the Power Switch is set to
"PLAY" or "M".
VIDEO
pg. 24, 25)
Each setting is linked with "s", which appears when the
Power Switch is set to "M". (
The parameters are the same as in the description on
page 17.
[ ] = Factory-preset
BEEP OFF / BEEP / [MELODY]
DEMO MODE OFF / [ON]
PRIORITY [LCD] / FINDER
CAM RESET EXECUTE / RETURN
VIDEO DISPLAY
The "n" (VIDEO DISPLAY) settings are effective only for
video playback except "BRIGHT".
The parameters (except "OFF" in ON SCREEN settings)
are the same as in the description on page 17.
[ ] = Factory-preset
BRIGHT
pg. 9, "Brightness Adjustment Of The Display"
ON SCREEN OFF / [LCD] / LCD/TV
When set to "OFF", the camcorder's display disappears.
DATE/TIME [OFF] / AUTO / ON
When set to "AUTO", the date/time are displayed in the
following cases:
When playback starts. The camcorder displays the date/
time when scenes are recorded.
When the date is changed during playback.
TIME CODE [OFF] / ON
SYSTEM
pg. 15)