Keil MCB2360 Quick Start Manual

Advertisement

MCB2300
programs for the NXP LPC23xx device family. With this hands-on process, you can
determine the hardware and software requirements for current and future product
development.
This board is available in two variants: the MCB2360 and the MCB2370.
The MCB2360 is populated with the
The MCB2370 is populated with the
The supplied microcontroller is the only difference between these boards.
The MCB2360 and MCB2370 boards contain all hardware components required in a single-
chip LPC2300 system.
This manual uses MCB2300 as a generic term to refer to either the MCB2360 or
MCB2370.

Kit Contents

The MCB2300 kit includes:
The MCB2300 Evaluation Board.
A µVision IDE Quick Start Guide.
An ARM Development Tools Overview.
A CD-ROM that includes:
An evaluation version of the
Development Kit.
Example programs for the MCB2300 Evaluation Board.
The MCB2300 Evaluation Board User's Manual (this manual).
Example Programs
KEIL\ARM\RV30\BOARDS\KEIL\MCB2300. All examples can be compiled and
debugged using the Evaluation Version.
Evaluation Board allows you to generate and test application
NXP LPC2368
NXP LPC2378
MCB2370 Board
RealView MDK-ARM Microntroller
for the MCB2300 Evaluation Board are located in the folder
microcontroller.
microcontroller.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MCB2360 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Keil MCB2360

  • Page 1: Kit Contents

    MCB2370 Board The MCB2360 and MCB2370 boards contain all hardware components required in a single- chip LPC2300 system. This manual uses MCB2300 as a generic term to refer to either the MCB2360 or MCB2370. Kit Contents The MCB2300 kit includes: The MCB2300 Evaluation Board.
  • Page 2: Hardware Requirements

    A serial cable, 9-pin male to 9-pin female, no longer than 10ft/3m, wired one-to-one. Software Requirements You must install the following required software to use the MCB2300 Evaluation Board: Windows Operating System The Keil µVision tool chain runs in these Windows Operating Systems:...
  • Page 3: Quick Start

    RealView MDK-ARM Evaluation Tools. Example programs written for the MCB2300. These programs are included in the MDK-ARM, DB-ARM and Keil ARM Evaluation Toolkits. Quick Start Use the following table to locate important information about the MCB2300 board and get started quickly.

This manual is also suitable for:

Mcb2370

Table of Contents