Viewfinder Adjustment; Brightness Adjustment Of The Display; Tripod Mounting - JVC GR-D252 Instructions Manual

Viewfinder Adjustment

1
Set the Power Switch to "A" or "M" while
pressing down the Lock Button located on the
switch.
2
Make sure the LCD monitor is closed and
locked. Pull out the viewfinder fully and adjust it
manually for best viewability.
3
Turn the Dioptre Adjustment Control until the
indications in the viewfinder are clearly focused.
Example:
PAUSE
Dioptre Adjustment Control
CAUTION:
When retracting the viewfinder, take care not to
pinch your fingers.
GETTING STARTED
Brightness Adjustment Of The
Display
1
Set the Power Switch
to "M" or "PLAY" while
pressing down the Lock
Button located on the
switch.
2
Open the LCD monitor
fully. ( pg. 18)
To adjust the brightness of
the viewfinder, pull out the
viewfinder fully and set
"PRIORITY" to "FINDER"
( pg. 24, 27).
3
Press MENU. The
Menu Screen appears.
4
Press + or – to select "n", and press MENU.
The CAMERA DISPLAY or VIDEO DISPLAY
Menu appears.
5
Press + or – to select "BRIGHT", and press
MENU. The Menu Screen closes and the
brightness control indicator appears.
6
Press + or – until the appropriate brightness
is reached.
7
Press MENU to clear the brightness control
indicator from the display.

Tripod Mounting

To attach the camcorder
to a tripod, align the
direction stud and screw
to the mounting socket
and stud hole on the
camcorder. Then tighten
the screw clockwise.
Some tripods are not
equipped with studs.
15
EN
+
–
MENU
BRIGHT