OCZ Z-Drive R4 Installation & Quick Start Manual page 31

102400000, 214990848
Writing inode tables: done
Creating journal (32768 blocks): done
Writing superblocks and filesystem accounting information: done
This filesystem will be automatically checked every 30 mounts or
180 days, whichever comes first. Use tune2fs -c or -i to override.
[root@x8dah oczeng]#
Use parted to print drive information and verify the file system was created correctly
[root@x8dah oczeng]#
[root@x8dah oczeng]# parted /dev/sdc print
Model: ATA OCZ Z-DRIVE R4 R (scsi)
Disk /dev/sdc: 1600GB
Sector size (logical/physical): 512B/4096B
Partition Table: gpt
Number Start End Size File system Name Flags
1 17.4kB 1600GB 1600GB ext4
[root@x8dah oczeng]#
Create a mount point
[root@x8dah oczeng]#
[root@x8dah oczeng]# mkdir /mnt/ocz
[root@x8dah oczeng]#
Mount the file system to the mount point
[root@x8dah oczeng]#
[root@x8dah oczeng]# mount /dev/sdb1 /mnt/ocz
mount: you must specify the filesystem type
[root@x8dah oczeng]# mount /dev/sdc1 /mnt/ocz
[root@x8dah oczeng]#
1
- 30 -