WILSON AUDIO Thor's Hammer Owner's Manual page 32

second person should then rotate his side
onto the plinth. Ensure the Thor's Ham-
mer is centered on the plinth as pictured
in Figure 9. Remove the casters.
Assembly and Care of the Grills
The Thor's Hammer's grills are at-
tached using Wilson's unique austenitic
stainless pin system. Each of the two
grills contain four pins. Assemble the grill
by screwing each pin into the four thread-
ed holes in each grill. The grill frames
are milled from solid "X" material. The
threads are tapped directly into the "X"
f 10 – t S P g h
igure hread teel inS into rill oleS
material. Avoid cross threading the grill
pins.
W i l s o n A u d i o S p e c i a l t i e s