Table of Contents
Advertisement
6
EN
SUPPLY POWER
BATT. RELEASE
Using the battery pack
1
Hook-on the battery pack's top end to the
camcorder. (Charging procedure,
2
Push in the battery pack until it locks into
place.
To remove the battery pack
Slide BATT. RELEASE and pull out the battery
pack.
PLAYBACK
PLAY/PAUSE
1
Set to "VIDEO"
1
Set the System Select Switch to "VIDEO".
2
Set the Power Switch to "PLAY".
3
Press REW.
— The tape will automatically stop at the
beginning of the tape.
4
Press PLAY/PAUSE.
— Playback starts and the playback picture
appears.
• To stop playback, press STOP.
(For more details,
• The viewfinder switches off automatically to
save power when the LCD monitor is opened
at an angle of over 45 degrees.
• The LCD monitor turns on/off when it is
opened/closed at approx. 45 degrees.
Or simply play back the tape on a VHS VCR
using the Cassette Adapter (VHS Playpak).
pg. 45
QUICK OPERATION GUIDE (VIDEO)
Hook on.
1
2
Push in.
pg. 10)
4
STOP
3
REW
2
Set to "PLAY"
pg. 42.)
INSERTING A VIDEO
CASSETTE
PUSH
4
1
Open
1
Open the LCD monitor to an angle of over
45 degrees.
2
Press EJECT to open the cassette holder.
3
Insert a video cassette.
4
Press PUSH to close the cassette holder.
(For more details,
SHOOTING
Set to
"VIDEO"
2
Set to
"CAMERA"
1
Slide the LENS COVER Open/Close Switch
to open the lens cover.
2
Set the System Select Switch to "VIDEO".
3
Set the Power Switch to "CAMERA".
— The power indicator will light and an
image will appear.
4
Press the Recording Start/Stop Button.
— Recording starts.
• To stop recording temporarily, momentarily
press the Recording Start/Stop Button once
again.
(For more details,
• The viewfinder switches off automatically to
save power when the LCD monitor is
opened at an angle of over 45 degrees.
• The LCD monitor turns on/off when it is
opened/closed at approx. 45 degrees.
EJECT
2
3
pg. 17)
1
LENS COVER
Open/Close
Switch
4
Recording
Start/Stop
Button
3
pgs. 18 – 21)
Hide quick links:
Advertisement
Table of Contents
