Table of Contents
Advertisement
22
EN
[Ex. : Fader]
Fade-in
Function indication
4
EFFECT
MOSAIC
LCD monitor
or viewfinder
B
K
OFF
(No indication)
EFFECT
Fade-out
After 2 sec.
FADER
B
K
MOSAIC
SHUTTER
SLIDE
OFF
Recording
Start/Stop
Button
RECORDING
Fade/Wipe
These effects let you make pro-style scene transitions.
Fade- or wipe-in works at recording start, and fade- or
wipe-out works at recording end or when you enter
Record-Standby mode.
ENGAGE FADE- OR WIPE-
STANDBY MODE
1
Press EFFECT to cycle through the modes as shown
to the left. Once the desired mode appears, it is
selected and reserved.
•The selected mode's name and its indication are
displayed for approx. 2 seconds. Then the name
disappears, and only the indication remains.
START OR END RECORDING
2
Press Recording Start/Stop Button to activate fade-in/
out or wipe-in/out.
TO CANCEL FADE- OR WIPE-
STANDBY MODE
3
Press EFFECT repeatedly until "OFF" appears.
•"OFF" is displayed for approx. 2 seconds and the
fade/wipe-standby mode is cancelled.
B
FADER
K
Fades in/out to a black screen.
MOSAIC (Fader)
Gradually turns/returns the picture into/from a mosaic
pattern.
SHUTTER (Wipe)
A black screen moves in from the top and bottom,
closing over the image like a shutter, or a new image
pushes open the black screen vertically from the centre.
SLIDE (Wipe)
A black screen moves in from the left to gradually cover
the image, or a new image moves in from right to left.
NOTES:
Pressing and holding the Recording Start/Stop Button
allows you to record a black blank screen or a mosaic
pattern if Mosaic Fader is selected.
The screen becomes slightly reddish when the Fade/
Wipe is used with Sepia (
With the Electronic fog filter mode (
when Fader (not Mosaic) is used, the image fades in/out
to a white screen.
Advanced Features (cont.)
pg. 21).
pg. 21) engaged,
Advertisement
Table of Contents
