19-Inch Rack Mounting - Martin DMX 5.3 Splitter User Manual

Warning! Do not fasten screws with a thread length of more than 4
mm (0.15 in.) into the ends of either Splitter.

19-inch rack mounting

Both the DMX 5.3 Splitter and the RDM 5.5 Splitter can be mounted in
pairs side-by-side in standard 19-inch racks. Both models have the same
dimensions and mounting system. To mount in a rack:
1. Fasten two Splitters together side-by-side using the four Torx 10
2. Fasten the L-brackets supplied with one of the Splitters to the outer
3. Use the L-brackets and suitable screws to fasten the Splitters into the
A
C
12
M3 x 6 thread-forming attachment screws supplied with one of the
Splitters as shown at B in Figure 7.
ends of the pair of Splitters using the eight supplied thread-forming
Torx 10 M3 x 4 screws as shown at C in Figure 7.
Warning! Do not fasten screws with a thread length of more than
4 mm (0.15 in.) into the ends of either Splitter.
rack.
B
Figure 7: Mounting options
Martin DMX 5.3 and RDM 5.5 Splitters user manual
A
B
C