Brother HL-L2300D Product Safety Manual page 16

If you are not able to solve a problem with your product, contact Brother Customer Service
(see Basic User's Guide: Brother numbers).
WARNING
For protection against the risk of electrical shock, always disconnect all cables from the wall
outlet before the equipment is installed, serviced, or modified.
DO NOT attempt to service this product yourself. Refer all servicing to a Brother Authorized
Service Center.
IMPORTANT
• This equipment may not be used on coin service lines provided by the telephone company or
connected to party lines.
• Brother cannot accept any financial or other responsibilities that may be the result of your use
of this information, including direct, special or consequential damages. There are no
warranties extended or granted by this document.
• This product has been certified to comply with FCC standards, which are applied to the USA
only. A grounded plug should be plugged into a grounded AC power outlet after checking the
rating of the local power supply for the product to operate properly and safely.
16