Editing; Tape Dubbing; Random Assemble Editing [R.a.edit] - JVC GR-AX860 Instructions Manual

38
PLAY/PAUSE
EDIT
To AUDIO out
To VIDEO out
Audio and Video
cable (optional)
To AUDIO IN
To VIDEO IN
VCR (Recording deck)

Tape Dubbing

1
2
3
4
Power switch
5
6
If your TV/VCR has
the SCART connector,
use the provided
7
cable adapter.

Random Assemble Editing [R.A.Edit]

Create edited videos easily using your camcorder as the
source player. You can select up to 8 "cuts" for automatic
editing, in any order you like. R.A.Edit is more easily
performed when the RM-V706U MBR (Multi-Brand
Remote) is set to operate with your brand of VCR (see
chart on the next page), but can also be performed by
operating the VCR manually.
CONNECT EQUIPMENT
Following the illustration at left, connect the
camcorder and the VCR.
PREPARE FOR DUBBING
Set the camcorder's power switch to PLAY, turn on
the VCR's power, and insert the appropriate
cassettes in the camcorder and the VCR.
SELECT VCR MODE
Engage the VCR's AUX and Record-Pause modes.
FIND EDIT-IN POINT
Engage the camcorder's Play mode to find a spot
just before the edit-in point. Once it's reached, press
PAUSE on the camcorder.
START EDITING
Press PLAY on the camcorder and engage the VCR's
Record mode.
STOP EDITING TEMPORARILY
Engage the VCR's Record-Pause mode and press
PAUSE on the camcorder.
EDIT MORE SEGMENTS
Repeat steps 4 through 6 for additional editing, then
stop the VCR and camcorder when finished.
CONTINUED ON NEXT PAGE

EDITING