Quick Review; Retake; Zooming - JVC GR-AX890UC Instructions Manual

Zooming

To produce the zoom in/out effect. Digital circuitry
extends the maximum magnification offered by
optical zoom. This system is called Digital Zoom.
• Slide the Power Zoom Lever
zoom in, or "W" to zoom out.
• The further you slide the Power Zoom Lever
the quicker the zoom action.
• Focusing may become unstable during Zooming.
In this case, set the zoom while in Record–
Standby, lock the focus by using the manual focus
( pg. 12, "Auto/Manual Focus"), then zoom in
or out in Record mode.
• The zoom level indicator
zoom. Once the zoom level indiator
reaches the top, all magnification from that point
is through digital processing.
• When using Digital Zoom, the quality of image
may suffer. To deactivate Digital Zoom, set
"D.ZOOM" ( pg. 20) to "OFF" in SYSTEM
MENU.

Quick Review

To check the end of the last recording.
1) Make sure the camcorder is in the Record–
Standby mode.
2) Press Q
q
and release quickly.
Tape is rewound for approx. 1 second and
played back automatically, then pauses in
Record–Standby mode for the next shot.
• Distortion may occur at the start of playback. This
is normal.
3
towards "T" to
3
T
- moves during
T
-

Retake

To re-record certain segments.
1) Make sure the camcorder is in the Record–
Standby mode.
2) Press and hold either RETAKE
the start point for new recording. Pressing R
forwards the tape and pressing Q
,
it.
3) Press the Recording Start/Stop Button
start recording.
• Noise bars appear and pictures may become
monochrome or darken during Retake. This is
normal.
13
^ q
or to reach
^
q
reverses
9
to