Features - JVC GR-AX761 Instructions Manual

PLAYBACK

Features

COUNTER R/M Button
Stop (5) Button
Rewind (2) Button
Play/Pause (4/6) Button
Fast-Forward (3) Button
Set to " ".
Tracking:
during playback. Factory-preset is Auto Tracking.
To activate Manual Tracking:
1) Press the TRACKING Wheel for approx. 2 seconds.
"MT" appears.
2) Rotate the TRACKING Wheel so that the noise bars
disappear.
To return to Auto Tracking, press the TRACKING Wheel
for approx. 2 seconds or set the Power Switch to "OFF"
and then "
Tracking finishes, the indication disappears.
When noise bars appear during playback, the
camcorder enters the Auto Tracking mode and "AT" is
displayed.
TRACKING
Manual Tracking may not work with tapes recorded on
Wheel
other VCRs or camcorders.
TBC (Time Base Corrector):
TBC Button fluctuating video signals to deliver a stable picture even
with old tapes. Factory-preset: TBC is engaged.
To activate/release the TBC mode, press TBC during
playback for more than 1 second. When the TBC mode is
activated, "TBC" is displayed.
Counter Memory Function:
locate a specific tape segment.
1) Press COUNTER R/M and hold for more than 1 second.
The counter resets to "0:00:00".
2) Press COUNTER R/M for less than 1 second.
"M" appears.
3) After recording or playback, press 5, then 2. The tape
automatically stops at or close to 0:00:00.
4) Press 4/6 to start playback.
The counter memory functions in the Fast-Forward and
Rewind modes.
To disable the Counter Memory Function, press
COUNTER R/M for less than 1 second so that "M"
disappears.
Eliminates noise bars that appear on-screen
" again. "AT" blinks. When Auto
For other notes,
31
EN
Removes jitter from
Makes it easier to
pg. 42