JVC GR-AX761 Instructions Manual page 18

18
EN
LIGHTOFF/AUTO/ON Switch
(GR-AX761 only)
Set to " " or " ".
RECORDING
Video Light
(GR-AX761 only): To brighten the
scene when natural lighting is too dim.
1) Set LIGHT OFF/AUTO/ON as required:
OFF : Turns off the light.
AUTO : Automatically turns on the light when the
camcorder senses insufficient lighting on the
subject.
ON : Always keeps the light on as long as the
camcorder is turned on.
The video light can only be used with the camcorder's
power on.
It is recommended to set the white balance
( pg. 29) to when you use the video light.
When not using the video light, turn it off to save battery
power.
Even if the battery indicator (
battery pack's charge is low, the camcorder may turn off
automatically when you turn on the video light, or when
you start recording with the video light turned on.
When LIGHT OFF/AUTO/ON is set to "AUTO":
• Depending on the lighting conditions, the video light
may keep turning on and off. In this case, manually
switch the light on or off using LIGHT OFF/AUTO/
ON.
• While the "Sports" or "High Speed Shutter" mode
( pg. 20) is engaged, the light is likely to stay on.
• While the "Twilight" mode (
the light will not activate.
DANGER
The video light can become extremely hot. Do not
touch it either while in operation or soon after
turning it off, otherwise serious injury may result.
Do not place the camcorder into the carrying case
immediately after using the video light, since it
remains extremely hot for some time.
When operating, keep a distance of about
30 cm (11-13/16") between the video light and
people or objects.
Do not use near flammable or explosive materials.
It is recommended that you consult your nearest JVC
dealer for replacing the video light.
Basic Features (cont.)
) does not blink if the
pg. 20) is engaged,