Table of Contents
Advertisement
TAPE LENGTH
Allows you to set the tape length depending on the
tape used: T20=20 minutes, T30=30 minutes,
T35=35 minutes, T40=40 minutes.
• Tape remaining time
correct tape length has been selected.
DISPLAY
FULL: Makes all of the indications appear on the
viewfinder during playback or recording.
SIMPLE: Makes the following indications
disappear from the viewfinder during recording or
playback:
, tape remaining time,
length (
pg. 9, 17).
OSD OUTPUT
ON: On-screen indications are displayed.
OFF: On-screen indications are turned off except
Date/Time, Instant Title and Warning Indication.
1
is correct only if the
, tape
REC TIME
You can shoot a series of pictures, each slightly
different, of the same object for a brief selected
period of time (Animation). REC MODE should be
set to "SP".
Select the desired recording time and press the
Recording Start/Stop Button
the subject.
• Fade- or wipe-in/out cannot be performed.
• This function is canceled when the power is shut
off or when the cassette is ejected.
INT. TIME
You can record sequentially at preset time spans.
Leaving the camcorder aimed at a specific subject,
you can record subtle changes over an extended
period of time (Time-Lapse). REC MODE should
be set to "SP".
Select the desired interval time and press the
Recording Start/Stop Button
• Fade- or wipe-in/out cannot be performed.
• This function is canceled when the power is shut
off or when the cassette is ejected.
21
9
after focusing on
9
.
Advertisement
Table of Contents
