JVC GR-AX655 Instructions Manual page 35

ORIGINAL TAPE (camcorder)
1 3
IN OUT IN OUT
EDITED TAPE (VCR)
AUTOMATIC EDITING TO VCR
2
IN OUT
1
2
EDIT STOP
3
NOTES:
If you performed step 1C on page 33, keep the remote
control pointed at the VCR during editing.
The on-screen display only appears while the
camcorder searches for each scene.
To dub a copy of the camcorder's (source) tape,
perform R.A.EDIT by specifying only one in-point
(and no out-point). The contents of the tape from the
specified in-point to the end of the tape are
automatically copied.
There may be noise at in- or out-points on the edited
tape with certain VCRs.
ENGAGE VCR'S RECORD–PAUSE
MODE
Point the remote control toward the VCR's infrared
sensor and press VCR REC STBY, or manually
engage the VCR's Record-Pause mode.
BEGIN AUTOMATIC EDITING
Press EDIT on the camcorder, and the previously
selected scenes are copied to the VCR in the
specified order.
END AUTOMATIC EDITING
When all selected scenes have been copied, the
camcorder and VCR enter the still or pause mode.
Press STOP on both units.
35