Uniden XDECT 6135BTU Series Owner's Manual page 30

Caller ID problems
Caller ID displays
briefly and then
clears.
Multi-handset
problems
I can't transfer calls.
Two handsets can't
talk to a caller.
A handset says
Unavailable.
I can't register a new
handset.
answering system
problems
The answering
system does not
work.
The system won't
record messages.
A handset can't
access the answering
system.
My outgoing
message is gone.
I can't hear the base
speaker.
Messages are
incomplete.
answering system
problems
The system keeps
recording when
I answer on an
extension.
28
Possible solutions
x You may have to change the line mode. Contact
Customer Service for instructions.
Possible solutions
x Reset the handset (see page 30).
x See if any handset is in Privacy Mode.
x Move the handset closer to the base.
x See if any handset is in Privacy Mode.
x Reset the handset (see page 30).
x See if you have 12 registered handsets.
Possible solutions
x Make sure the answering system is on.
x Make sure the base is plugged in.
x See if Record Time
x Delete messages (memory may be full).
x The answering system works with land line calls
only.
x See if another handset is using the system.
x Make sure the phone is in standby.
x If there was a power failure, re-record your
personal outgoing message.
x Make sure call screening is turned on.
x Change the base speaker volume.
x Increase the Record
x Delete messages (memory may be full).
Possible solutions
x You may have to change the line mode. Contact
Customer Service for instructions.
is set to Announce
Time.
Only.