Getting Started; Power - JVC GR-AX1027 Instructions Manual

8
EN
CHG. (charge) indicator

POWER

indicator
END
indicator
REFRESH switch
Hook on.
BATT. RELEASE
ATTENTION:
Before detaching the power source,
make sure that the camcorder's power
is turned off. Failure to do so can result
in a camcorder malfunction.
Power
This camcorder's 3-way power supply system lets you
choose the most appropriate source of power.
NOTES:
No function is available without power supply.
Use only specified power supply.
Do not use provided power supply units with other equipment.
CHARGING THE BATTERY PACK
Marks 1
To AC outlet
2
3
REFRESH indicator
BATT. PACK
BN-V12U
BN-V22U
BN-V25U
USING THE BATTERY PACK
1
2
Push in.
( ): When the Video Light is on
**REFRESH
The AC power adapter features a REFRESH function that
allows you to fully discharge the battery pack before
recharging.
To discharge the battery . . .
.... attach the battery pack to the adapter as shown in the

GETTING STARTED

SUPPLY POWER
Connect the charger's AC power cord to a wall
outlet. The power indicator lights.
ATTACH BATTERY PACK
Align the marks and slide the battery pack in the
direction of the arrow until it locks in place.
The CHG. indicator lights.
DETACH BATTERY PACK
When charging is completed, the END indicator
lights. Slide the battery pack opposite the direction
of the arrow.
CHARGE
approx. 1 hr. 10 min.
approx. 2 hrs. 10 min. approx. 7 hrs.
approx. 2 hrs. 40 min. approx. 10 hrs.
ATTACH BATTERY PACK
Hook its top end to the camcorder and push the
battery pack in until it locks in place.
DETACH BATTERY PACK
Slide BATT. RELEASE and pull out the battery pack.
BATT. PACK RECORDING TIME
BN-V12U approx. 1 hr. (35 min.)
BN-V22U approx. 2 hrs. 10 min. (1 hr. 20 min.)
BN-V25U approx. 2 hrs. 50 min. (1 hr. 50 min.)
illustration to the left. Then push REFRESH. The
REFRESH indicator lights when discharging starts,
and goes out when discharging is complete.
DISCHARGE
approx. 3 hrs. 30 min.