Loading/Unloading A Cassette - JVC GR-AX201 Instructions Manual

Cassette holder
PUSH Button EJECT Switch
Erase Protection Gear

Loading/Unloading A Cassette

1
2
3
NOTES:
The cassette holder can't be opened unless a power
supply is attached.
Make sure that the tape is not slack when loading the
cassette. If there is any slack, turn the gear on the
cassette in the direction of the arrow to take up the
slack.
Make sure the Erase Protection tab is in the position that
allows recording. If not, slide the tab. Some cassettes
Turn to take
have removable tabs. If the tab has been removed, cover
up slack.
the hole with adhesive tape.
The cassette holder cannot be opened while the
camcorder is in the record mode.
OPEN CASSETTE HOLDER
Slide EJECT until the holder opens. Do not use force
to open.
INSERT/REMOVE CASSETTE
Make sure the label is facing outward.
CLOSE CASSETTE HOLDER
Press PUSH and make sure the holder is closed and
locked.
9
EN