Table of Contents
Advertisement
VC_nano_Series.pdf – VC nano Series Smart Cameras Operating manual
3.4 VC nano cube & VC nano tube sensor head cable connectors
The sensor head cables must be connected with the arrow on the connector showing to the upper side
of the VC nano cube camera, as shown in the picture below.
If you have only one sensor head, connect it to the connector #1 on the picture!
Hot swapping is no possible! A newly plugged head only becomes active when the camera is rebooted
!
(also when unplugged and re-plugged).
1996-2014 Vision Components GmbH Ettlingen, Germany
Head #1
Head #2
23
Advertisement
Table of Contents
