Available Accessories / Cables For Power Supply And Io Interface - Vision VC nano Series Operating Manual

VC_nano_Series.pdf – VC nano Series Smart Cameras Operating manual
3.2.3.2 Connection of PLC/trigger outputs VC nano Series
12-24V
(red cable)
inside camera
3.2.4

Available Accessories / Cables for Power Supply and IO Interface

Equipped on one end with a Hirose plug jack, length 5m, 10m or 25m
Refer to section 5.1 for a list of available cables with order numbers.
 1996-2014 Vision Components GmbH Ettlingen, Germany
-
12-24V
-
-
-
+
-
-
relais,
motor,
etc.
-
GND
(black cable)
4 digital outputs
1 trigger output
Operating Voltage 12 to 24 V
current per output: 400 mA (total
current all outputs < 1000 mA)
Connect 12-24 V PLC and camera
power supply pins 1, 2 and 9.
bit = 1 output will switch positive
voltage
short-circuit and over- temperature
protection (2A)
21