Pioneer G-5 Product Update Manual page 27

Trap Switch Location (Media Receiver).
For video data transmission from the Media Receiver to the PDP-435HD and PDP-505HD-series Plasma Displays, digital
signals are used. Therefore, this unit adopts the HDCP (High-bandwidth Digital Content Protection) system for copyright
protection. This unit is also provided with a detection switch (TRAP switch) that will prohibit the unit from being turned on again
The TRAP switch is disabled while the unit is turned off.
When performing internal diagnosis, fix the switch to the OFF position using adhesive tape before turning on the
unit. After servicing, be sure to remove the adhesive tape.
TRAP switch
To Release an Activated Trap Switch:
1. Enter Factory Service mode
2. Select initialize mode
3. Hold down Display Key on Remote
for 5 seconds.
27