System Cabling - IBM 5155 Manual To Operations

If you have any options to install, install them at this time.
Remove and read the Option Instructions that came in
the carton with your option. If your options have
already been installed and require any cabling continue
with "System Cabling."
System Cabling
When you have installed your options, connect your
cables and power cords to the system unit as shown in
the following figure.
CAUTION
Connect power cords to properly grounded
receptacles.
Note:
If
you are using your television or a non-mM
display, you could experience data errors when you
~
operate your diskette drive. This interference can
easily be corrected by moving your television or
display a minimum of 30-cm (12-in.) away from
your mM Portable Personal Computer.
1-26 Introduction