Direct Printing With Pictbridge Printer - JVC Everio GZ-MG730 Manual Book

Print Setting
Direct Printing with PictBridge
Printer
If your printer is compatible with PictBridge,
still images can be printed easily by
connecting the camera directly to the printer
with the USB cable. DPOF setting can also be
used. (p. 41)
Preparation:
Close the LCD monitor to turn off the camera.
PictBridge
Printer
You can also connect the cables using the
jacks on the Everio dock. (p. 10)
1
Open the LCD monitor to turn on the
camera.
2
Select [DIRECT PRINT].
42
(Continued)
USB Jack
USB Cable
To AC Outlet
USB Jack
PLAYBACK ON PC
CREATE DVD
BACK UP
DIRECT PRINT
To Print by Selecting a Still Image
After performing steps 1-2 (left column)
3
Select [SELECTED PRINT].
4
Select the desired image.
5
Select the desired setting.
•
[NUMBER OF PRINTS]:
The number of prints can be set from 1
to 99.
•
[DATE]:
Set to print the date.
6
Select [PRINT].
L
To stop printing after printing starts
1) Select [STOP].
2) When [QUIT PRINTING?] appears,
select [YES].
QUIT
#
DIRECT PRINT
SELECTED PRINT
DPOF PRINT
RETURN
PRINT THIS IMAGE?
YES
NUMBER OF PRINTS
DATE OFF
PRINT
RETURN