Kenwood VRS-N8100 Service Manual page 33

VRS-N8100
(For Europe and Australia)
AUDIO section
For Europe
Rated power output during STEREO operation ........... 100 W + 100 W
DIN/IEC (20 Hz ~ 20 kHz, 0.7% T.H.D. at 6 Ω )
Effective power output during STEREO operation............ 130 W + 130 W
For Australia
Rated power output during STEREO operation
70 watts per channel minimum RMS, both channels driven, at 8
Ω from 20 Hz to 20 kHz with no more than 0.7% total harmonic
distortion. (FTC)
Rated power output during STEREO operation ........
DIN/IEC (20 Hz ~ 20 kHz, 0.7% T.H.D. at 6 Ω )
Effective power output during STEREO operation
Effective power output during SURROUND operation
FRONT ................................................................... 100 W + 100 W
(1 kHz, 0.5% T.H.D. at 6 Ω one channel driven)
............................
FRONT ...................................................................
(1 kHz, 10% T.H.D. at 6 Ω one channel driven)
CENTER................................................................................ 100 W
(1 kHz, 0.5% T.H.D. at 6 Ω one channel driven)
CENTER................................................................................
(1 kHz, 10% T.H.D. at 6 Ω one channel driven)
SURROUND........................................................... 100 W + 100 W
(1 kHz, 0.5% T.H.D. at 6 Ω one channel driven)
(1 kHz, 10% T.H.D. at 6 Ω one channel driven)
SURROUND BACK/SUBWOOFER...................................... 100 W
(1 kHz, 0.5% T.H.D. at 6 Ω one channel driven)
(1 kHz, 10% T.H.D. at 6 Ω one channel driven)
Total harmonic distortion ............................... 0.09% (1 kHz, 50 W, 6 Ω)
Frequency response
DIGITAL IN (DVD, VIDEO 1, VIDEO 2, AUX, GAME)
......... 10 Hz ~ 44 kHz, Sampling frequency 96kHz, +0 dB ~ –3.0 dB
Signal to noise ratio
DIGITAL IN (DVD, VIDEO 1, VIDEO 2, AUX, GAME) ............. 96 dB
Input sensitivity / impedance
LINE (DVD, VIDEO 1, VIDEO 2, AUX, FRONT AUX, GAME)
............................................................................... 200 mV / 47 kΩ
Output level / impedance
REC OUT ................................................................. 200 mV / 1 kΩ
PRE OUT (SURROUND BACK) ...................................... 1 V / 1 kΩ
PRE OUT (SUBWOOFER) ............................................. 1 V / 1 kΩ
Tone control
BASS ................................................................. ±10 dB (at 100 Hz)
TREBLE ............................................................ ±10 dB (at 10 kHz)
DIGITAL AUDIO section
Sampling frequency .......... 32 kHz, 44.1 kHz, 48 kHz,88.2 kHz, 96 kHz
Input level / impedance / wave length
Optical (VIDEO 1, AUX, GAME)
......................................... (–15 dBm ~ –24 dBm), 660 nm ±30 nm
Coaxial (DVD, VIDEO 2) ........................................ 0.5 Vp-p / 75 Ω
Notes
1.KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed without notice.
2.The full performance may not be exhibited in an extremely cold location (under a water-freezing temperature).
SPECIFICATIONS
(1 kHz, 10% T.H.D. at 6 Ω )
100 W + 100 W
........
130 W + 130 W
(1 kHz, 10% T.H.D. at 6 Ω)
130 W + 130 W
130 W
130 W + 130 W
130 W
VIDEO section
Input sensitivity / impedance
Composite (DVD, VIDEO 1, VIDEO 2, FRONT AUX, GAME)
................................................................................... 1 Vp-p / 75 Ω
S VIDEO (DVD, VIDEO 2)
Luminance signal ................................................... 1 Vp-p / 75 Ω
Chrominance signal ........................................ 0.286 Vp-p / 75 Ω
COMPONENT VIDEO (DVD, VIDEO 2)
Luminance signal ................................................... 1 Vp-p / 75 Ω
-signal ........................................................ 0.7 Vp-p / 75 Ω
C /C
B R
Output level / impedance
Composite (VIDEO 1, MONITOR OUT) .................... 1 Vp-p / 75 Ω
S VIDEO (MONITOR OUT)
Luminance signal ................................................... 1 Vp-p / 75 Ω
Chrominance signal ........................................ 0.286 Vp-p / 75 Ω
COMPONENT VIDEO (MONITOR OUT)
Luminance signal ................................................... 1 Vp-p / 75 Ω
-signal ........................................................ 0.7 Vp-p / 75 Ω
C /C
B R
FM tuner section
Tuning frequency range ........................................ 87.5 MHz ~ 108 MHz
Usable sensitivity (DIN at 75 Ω)
MONO ........................... 1.3 µV/ 13.2 dBf (40 kHz dev, S/N 26 dB)
STEREO .................. 45 µV/ 42.1 dBf (40 + 6 kHz dev, S/N 46 dB)
Total harmonic distortion (DIN at 1 kHz)
MONO ............................................................ 0.2% (71.2 dBf input)
STEREO ........................................................ 0.8% (71.2 dBf input)
Signal to noise ratio (DIN weighted at 1 kHz)
MONO .......................................................... 65 dB (71.2 dBf input)
STEREO ...................................................... 60 dB (71.2 dBf input)
Selectivity (DIN ±300 kHz) ............................................................ 64 dB
Stereo separation (1 kHz) ............................................................. 36 dB
Frequency response (30 Hz ~ 15kHz) ....................... +0.5 dB, –3.0 dB
AM tuner section
Tuning frequency range ........................................ 531 kHz ~ 1,602 kHz
Usable sensitivity (30% mod, S/N 20 dB) ................ 16 µV / (600 µV/m)
Signal to noise ratio (30% mod, 400 Hz)
........................................................... 50 dB (60 dBµ V EMF input)
GENERAL
Power consumption ....................................................................... 85 W
Dimensions ........................................................ W : 440 mm (17-5/16")
Weight (Net) ................................................................... 4.6 kg (10.1 lb)
H : 079 mm (3-1/8")
D : 364 mm (14-5/16")