Some sockets on the illustration of the main connection panel may be occupied by internal connections. Do not disconnect
the cables from these sockets!
VIDEO IN (AV5 – AV6)
For video signal. On AV6 you can connect a
camera or a camcorder.
Y – Pb – Pr (AV2 – AV3)
For video signals from an external source, e.g.
HDTV source. You can use the socket in
conjunction with an AV socket or a digital audio
socket.
SPDIF (AV1 – AV3, AV5 – AV6)
Digital audio input socket, e.g. DVD player.
TTL/RS232
Only for use in Hotel setups.
PUC 1+2
For an external IR-transmitter used with Home
cinema setups or an HDMI Expander.
IR IN
For an extra IR-receiver when the TV is set up with
a projector.
STAND
For connection of a motorised stand.
MASTER LINK
For a compatible Bang & Olufsen audio or video
system. The socket is also used for BeoLink
distribution of sound and picture throughout the
house.
Analogue (ANT.)
Aerial input sockets for an external aerial/cable TV
network.
CENTRE 1
For connection of a centre speaker, e.g. BeoLab 7.
For further information, see the speaker's own
guide.
2
*DVB The number and types of DVB sockets depend on which optional DVB module
is installed in the television.
POWER LINK 1–6
For connection of external speakers in a surround
sound setup. See the Guide for further
information.
1 (SUB)
For connection of up to two Bang & Olufsen
subwoofers. A cable splitter for such connections
is available from your Bang & Olufsen retailer.
S-VIDEO (AV6)
For the connection of, e.g., a game console.
PCMCIA
For insertion of a card and module for access to
digital satellite channels. For further information
about compatible card and module combinations,
contact your Bang & Olufsen retailer.
SMARTCARD
For insertion of a card and module for access to
digital satellite channels. For further information
about compatible card and module combinations,
contact your Bang & Olufsen retailer.
The AV6 socket group is placed on the side
connection panel.
PHONES
For connection of stereo headphones.
> To mute speakers turn the volume wheel quickly
counter-clockwise. (Beo4: Press in the middle of
the button).
> Turn the volume wheel either way to adjust
volume in headphones. (Beo4: Press or ).
> To restore sound in speakers, turn the volume
wheel quickly counter-clockwise. (Beo4: Press
the middle of the button).
NOTE! Prolonged listening at high volume levels
can cause hearing damage!
The USB port (
) is for software updates. Only
available if you have the optional DVB module. For
further information contact your retailer.
NOTE! Video recorders can only be connected to
the AV1 and AV2 socket groups, as these are the
only sockets groups for video output. Connect the
primary recorder to AV1 and the secondary
recorder to AV2.
25
S-VIDEO
VIDEO IN
SPDIF
L IN
R IN
PUC
PHONES