Buick Regal 2011 Owner's Manual page 173

7-30 Infotainment System
Using the Re dial Command
b
1. Press .
For vehicles without a
navigation system, the
system responds Ready,
followed by a tone.
For vehicles with a
navigation system, the
system responds with a
tone. After the tone, say
Hands Free. The system
responds Ready, followed
by a tone.
2. After the tone, say Re dial. The
system responds Re dial using
<phone name> and dials the
last number called from the
connected Bluetooth phone.
Once connected, the person called
will be heard through the audio
speakers.
Receiving a Call
When an incoming call is received,
the audio system mutes and a ring
tone is heard in the vehicle.
b
Press .
$ c
Press to ignore a call.
Call Waiting
Call waiting must be supported on
the Bluetooth phone and enabled by
the wireless service carrier.
b
Press to answer an
incoming call when another call
is active. The original call is
placed on hold.
b
Press again to return to
the original call.
To ignore the incoming call, no
action is required.
$ c
Press to disconnect the
current call and switch to the call
on hold.
Three Way Calling
Three way calling must be
supported on the Bluetooth phone
and enabled by the wireless service
carrier.
1. While on a call, press
system responds with Ready,
followed by a tone.
2. Say Three way call. The
system responds with
Three way call, please say dial
or call.
3. Use the dial or call command to
dial the number of the third party
to be called.
4. Once the call is connected,
b
press to link all callers
together.
Ending a Call
$ c
Press to end a call.
b
. The