JVC Everio GZ-HM400 Instructions Manual page 83

Changing the Menu Settings
Menus
Y
BASIC SETTINGS
@ CONT. SHOOTING SPEED
Sets the interval for continuous
shooting.
[
DEMO MODE
Introduces special features of
the camcorder when there is no
operation for about 3 minutes during
recording mode.
AUTO POWER OFF
(
If the camcorder is not operated for
5 minutes while the power is on,
it turns itself off automatically to
conserve power.
\
OPERATION SOUND
Turns on/off the operation sound.
RECORD BUTTON
Enables the recording button [REC]
on the LCD monitor.
`
QUICK RESTART
Enables the camcorder to start
up quickly when you turn off the
camcorder and then on again within
5 minutes by closing and opening
the LCD monitor.
82
EN
(Continued)
Settings: [ ] = Factory-preset
Select [BASIC SETTINGS], then select sub-menus.
With each setting, continuous recording is performed at the
following speed:
HIGH SPEED: 6 frames in 0.4 seconds at 15 frames per
second. ( )
MEDIUM SPEED: 6 frames in 0.9 seconds at 7 frames per
second. ( )
[LOW SPEED]: 2 frames per second while SNAPSHOT is
pressed. ( )
NOTE
The continuous shooting speed will drop if this function is used
repeatedly.
OFF: Deactivates the function.
[ON]: Activates the function.
NOTE
•
The demonstration only works when the AC adapter is
connected, not with the battery pack.
•
If an SD card is in the camcorder, demonstration will not take
place even if this mode is set to [ON].
OFF: Disables the function.
[ON]: Activates the function.
To turn the camcorder on again, close the LCD monitor
and open it again when using the battery pack. When
using the AC adapter, perform any operation such as
zooming.
OFF: Turns off the operation sound.
[ON]: The melody sounds when operations are performed.
OFF: Deactivates the function.
[ON]: Activates the function.
OFF: Deactivates the function.
[ON]: If the LCD monitor is opened again within 5 minutes,
the camcorder starts quickly. The power consumption
used for the 5 minute period after the LCD monitor is
closed is approximately 1/3 that used during recording.
This enables you to save more power than leaving the
power on.