JVC Everio GZ-HM400 Instructions Manual page 80

Mode
y
IMAGE SIZE
#
Selects the image size for still
images.
# n
IMAGE QUALITY
Sets the image quality.
@
ZOOM
!
Sets the maximum zoom ratio.
8
GAIN
Makes the sensitivity of the
#
image sensor equivalent to the
ISO of film.
! # q
OIS
Compensates for hand shake.
[
GAIN UP
Makes the subject appear
bright automatically when you
!
record in dark places. However,
the overall color tones appear
grayish.
Menus Settings: [ ] = Factory-preset
4:3 mode:
[3456X2592(9M)] / 3072X2304(7M) / 2592X1944(5M) /
1600X1200(1.9M) / 640X480(0.3M)
16:9 mode:
3456X1944(6.7M) / 3072X1728(5.3M) /
2592X1456(3.8M) / 1920X1080(2M) / 1280X720(0.9M)
[FINE] / STANDARD
[10X/OPTICAL] / 15X/DYNAMIC* /
60X/DIGITAL / 200X/DIGITAL
* Dynamic zoom
The combination of optical and digital zoom technology
offers higher zoom ratio than optical zoom without reducing
the quality.
NOTE
Optical zoom is used up to [10X/OPTICAL]. Digital zoom
is used from more than [10X/OPTICAL] up to the selected
zoom ratio.
[AUTO] / ISO100 / ISO200 / ISO400 / ISO800 /
ISO1600 / ISO3200
NOTE
With the [AUTO] setting, the sensitivity of the image sensor
is increased automatically in less ambient light.
OFF: Deactivates the function.
[ON]: Activates the function.
NOTE
•
Complete stabilization may not be possible if hand shake
is excessive, or depending on the shooting conditions.
•
Switch off this mode when recording with the camcorder
on a tripod.
OFF: Deactivates the function.
AGC: Electrically brightens the scene in dark place.
[AUTO]: Automatically brightens the scene when it
is dark. (Becomes brighter than [AGC] in some
condition.)
79
EN