Additional Settings; Setting The Picture Mode; Displaying The Multi-Angle Symbol; Activating And Deactivating The Status Line - Grundig Scenos UMS 4400 DVD User Manual

- - GENERAL PAGE - -
TV DISPLAY
s
PIC MODE AUTO
ANGLE MARK FILM
OSD LANG VIDEO
CAPTIONS SMART
SSMART
\
MAIN PAGE
SET PICTURE MODE
- - GENERAL PAGE - -
TV DISPLAY
PIC MODE
s
ANGLE MARK ON
OSD LANG OFF
CAPTIONS
\
MAIN PAGE
ANGLE MARK ON/OFF
- - GENERAL PAGE - -
TV DISPLAY
PIC MODE
ANGLE MARK
OSD LANG
s
CAPTIONS ON
OFF
\
MAIN PAGE
CLOSED CAPTION
42

ADDITIONAL SETTINGS

Like the basic settings, you can make additional settings in the set-up menu.

Setting the picture mode

This setting controls contrast and sharpness depending on the medium inserted.
1
Select the »GENERAL SETUP« menu item with » « or » « and
confirm with »DEMO/OK«.
2
Select »PIC MODE« using » « or » «.
3
Use » « to move to the right column.
The following settings are available: »AUTO«, »FILM«, »VIDEO«,
»SMART« or »SSMART«.
4 Select the required setting by pressing » « or » « and confirm with
»DEMO/OK«.

Displaying the multi-angle symbol

This function allows a scene to be played from various camera angles (multi-
angle technology). The current angle and the total number of angles is displayed
by the multi-angle-symbol.
1
Select the »GENERAL SETUP« menu item with » « or » « and
confirm with »DEMO/OK«.
2
Select »ANGLE MARK« by pressing » « or » «.
3
Use » « to move to the right column.
The following settings are available: »ON« or »OFF«. »OFF« is the default
value.
4 Select the required setting by pressing » « or » « and confirm with
»DEMO/OK«.

Activating and deactivating the status line

You can switch the status line on and off as required.
1 Select the »GENERAL SETUP« menu item with » « or » « and
confirm with »DEMO/OK«.
2
Select »CAPTIONS« using » « or » «.
3
Use » « to move to the right column.
The following settings are available: »ON« or »OFF«.
4
Select the required setting by pressing » « or » « and confirm with
»DEMO/OK«.
_______________________________________