Table of Contents
Advertisement
Merrill
The SD1
cable connection fro external/studio flash units.
CAUTION!!
•
S-TTL auto flash does not work, if PC Synchro Terminal is used.
•
Set the camera's exposure mode to M and set to flash synchronized speed
Sync (1/180) or a shutter speed of 1/160 or lower. See the instruction manual
of the particular flash used for additional information.
•
The SD1 Merrill's PC Synchro Terminal is compatible with plugs that have a
positive (+) polarity on the central pin and a negative (-) polarity on the shield.
If the plug has reverse polarity, use a commercially-available polarity
conversion cord.
WARNING!!
•
The PC terminal cannot accept flashes that use a voltage of more than 250V.
Higher voltage will damage the camera. Please ask the manufacturer of the
flash about the voltage and compatibility with the PC terminal.
AUTO ROTATE
It is possible to record the vertical image information to images.
Please set from [
Off
On
(default)
When vertically orientated images are reviewed, they will automatically rotate
and be displayed vertically.
When vertically orientated images are reviewed in Sigma Photo Pro, they will
automatically rotate and be displayed vertically.
When vertically orientated images are rotated by pressing [
Menu] (P.28) → [Rotate], the rotated orientation will be stored.
83
is equipped with a PC Synchro Terminal, which accepts a
Capture Settings] (P.28) → [Auto Rotate].
The vertical image information will not be recorded.
The vertical image information will be recorded.
Playback
Advertisement
Table of Contents
