Keyboard - Philips 50PUT8509 User Manual

To switch subtitles on, off or Automatic.
4 -  LIST
To open or close the channel list.
5 -  Channel
To switch to the next or previous channel in the channel list.
To open the next or previous page in Text or start the next or
previous chapter on a disc.
6 -  Mute
To mute the sound or to restore it.
7 - TEXT
To open or close Text / Teletext.
6.2

Keyboard

Overview
1 - Qwerty / Azerty character
Character position if the keyboard layout is set to Azerty.
2 -  Shift
To type uppercase characters.
3 - Ω Special characters
To open the onscreen keyboard to select accented characters
or symbols.
4 - Fn key
To type a number or punctuation character.
5 -  Spacebar
6 - Navigation and OK
7 -  Backspace
To delete the character in front of the text cursor.
8 -  Share this
To share online what you are watching at the moment.
Writing text
With the keyboard on the back of the remote control, you can
write text in any text field on screen. Turn the keyboard facing
upwards to activate the keyboard keys. Hold the remote control
with two hands and type with both thumbs.
Enter text
• To enter text in a text field on screen, select the text field and
start typing. Press OK to confirm the text.
Uppercase and lowercase
• To type an uppercase character, press the  (Shift) key just
before you type the character.
• To type several uppercase characters consecutively, press and
hold the  key while typing.
• To type uppercase constantly, press the  key for 2 seconds
to switch the keyboard in uppercase mode.
• To switch out of uppercase mode, press the  key again. If
no keys are pressed for 20 seconds, the uppercase mode
switches off automatically. Also, if you press another modifier
key, like Fn or Ω, you switch out of uppercase mode.
Numbers and punctuation characters
• To type a number or punctuation character, press the Fn key
just before you type the number or punctuation character you
need. You can switch the Fn mode on or off as you do for the
uppercase mode.
Internet
• You can use the Fn key to enter www. or .com.
Accented letters and symbols
Accented characters and symbols are not directly available on
the remote control keyboard.
To type such a character, you can open the onscreen keyboard.
To open the onscreen keyboard, press Ω. In the onscreen
keyboard, you can navigate to the character you need. Switch
the keyboard layout with the colour keys. Press OK to enter a
character. The onscreen keyboard disappears when you press a
character on the remote control keyboard.
23