Step 4: Connect Your Xmp3 Radio - XM XMP3 Installation Manual

Vehicle Installation

Step 4: Connect your XMp3 radio

1
Plug the antenna jack into antenna on the cradle .
2 Plug the power adapter jack into 5V DC on the cradle .
NOTE! Some car cigarette lighter/auxiliary power sockets remain powered even when the
car is turned off . To avoid battery drain, it is recommended to unplug the power adapter or
remove the XMp3 radio from the car cradle if leaving the car unattended for an extended
period .
3 Plug the audio adapter jack into line out on the cradle .
• Use the audio cable (included) if your vehicle has an audio input jack .
• Use the cassette adapter (sold separately) if your vehicle has a built in
cassette player
4 Insert car cradle onto the mount then slide it
down until it feels tightly in place .
5 Insert your XMp3 radio into the cradle .
NOTE! If your car does not contain a cassette player or an audio input, you will need to
use either the XM SureConnect (sold separately) or the FM Direct (sold separately) .
12