Audio Control DQDX Quick Install Manual page 2

Quick Install Guide
If you are a seasoned audio enthusiast and are chomping at the bit to begin
your experience with the DQDX, we offer some Quick Install Guidelines be-
page 8 as good guidelines.
1
that allows you access to the top panel controls.
2 The DQDX needs to be installed in the signal path between your source
Note: If your source unit has front, rear, and subwoofer RCA Line Level out-
puts, connect them to the corresponding inputs on your DQDX. If your source
unit has only front and rear inputs fear not! Just connect these to the front
and rear inputs on the DQDX and switch the "Sub to Front" jumper to the ON
position. There is a more detailed of the jumpers located under the cover in
the section titled "Under The Cover" (Duh!). Changing this jumper to ON will
outputs of the DQDX.
3
your DQDX and run to your nearest authorized AudioControl dealer to have
4
Don't forget the fuse!
5
DQDX.
6 VERY IMPORTANT! Make sure the input gain control on your after-
7 Turn on the system and level match your DQDX to your source unit and
8
are not using the crossover on your source unit. We would always recommend
in the DQDX.
9
0
channels for optimum sound.
and subwoofer outputs.
-
page 2