Pearl™ 8120; Insert The Battery; Charge The Battery - Blackberry PEARL 8120 Getting Started Manual

Set Up Your BlackBerry Pearl 8120
Steps?

Insert the Battery

4
1. Press the release button for the battery cover.
Takes?
0.5 to 1 minute
2. Slide off the battery cover.
3. Insert the battery so that the metal contacts on the
battery align with the metal contacts on your device.
4. Slide the battery cover back onto the device so that it
clicks into place.
If the battery is charged, the BlackBerry Pearl 8120 turns
Steps?
on. If the device does not turn on, charge the battery.
4
Charging the battery can take an hour or longer.
Note:
If you have an
available USB
port on your

Charge the Battery

computer and you
have installed the
1. Connect the small end of the travel charger cable to
BlackBerry ® Desktop
Software, you can the USB port on the side of your BlackBerry
use the USB cable
2. Fold the plug blades down.
that came with your
device to connect
3. Plug the device charger into a power outlet.
your device to
your computer for
4. Charge the battery to full power.
charging. For more
information, see
the "Install the
BlackBerry Desktop
Software" topic.
CAUTION: Use only accessories that Research In Motion has approved for use with your BlackBerry Pearl 8120.
Use of other accessories might invalidate your warranty and might be dangerous.
6
®
device.